How to Connect Miro to an AI Agent: Step-by-Step Guide
· DoubleX
Quick answer
To connect Miro to an AI agent, add the Miro connector on the Connectors screen, sign in with your Miro account, choose a personal, team or company connection, and pick which agents can use it. In DoubleX Agentes you can also limit each action and review every step in Tasks.
Miro is where many teams plan projects, map processes and run workshops. Connecting it to an AI agent lets you ask for new boards, diagrams and notes in plain language, or have the agent read what is already on a board. This guide walks through the full path, from creating an account to your first request, including the connection type and how to limit what the agent can do.
What can an AI agent do in Miro once connected?#
Once connected, an agent can read and create boards, diagrams and notes in Miro. The connector exposes those tools, and the agent uses them when you ask for something in a conversation or in a scheduled routine.
Here are some typical uses:
| Task | How the agent helps | Miro capability |
|---|---|---|
| Summarize a workshop | Reads the sticky notes on a board and groups them by theme | Read boards and notes |
| Document a process | Turns a text description into a flow diagram | Create diagrams |
| Prepare a retrospective | Creates a board with notes for what worked and what did not | Create boards and notes |
| Review a roadmap | Reads a planning board and lists open questions | Read boards |
For more ideas you can copy, see Miro with an AI Agent: Example Requests and Routines.
What should you prepare before connecting?#
Prepare three things: a Miro account that can open the boards you care about, a short list of those boards, and a decision about who will use the agent. Having these ready makes the connection and permission choices much easier.
- Miro account: the person who connects needs to be able to sign in to Miro and see the boards the agent should work on.
- Boards: note which boards or workspaces are relevant, such as the product roadmap or the monthly planning board.
- Users: decide whether this is just for you, for one team, or for the whole company. This determines the connection type, covered below.
- DoubleX Agentes account: creating an account is free and needs no card. If you have not yet, the Quickstart shows the first steps, including the diagnostic, a 5 to 10 minute conversation that suggests where AI helps most.
How do you add the Miro connector on the Connectors screen?#
You add Miro from the Connectors screen by choosing it from the list and authorizing access with your Miro account. The whole flow takes a few steps in DoubleX Agentes:
- Sign in to DoubleX Agentes and create an agent, or use the diagnostic to generate a team of agents with your company's instructions.
- Open the Connectors screen and find Miro (it is listed in the design category).
- Start the connection and sign in to Miro when prompted, approving access.
- Choose the connection type: personal, team or company.
- Open the Agents screen, select the agent that should use Miro, and enable the connector for it.
- Set which actions the agent is allowed to perform (see the section on permissions).
- Ask for something in a conversation, or schedule a routine.
To learn how connectors work in general, including the API, see Connectors.
Personal, team or company connection: which should you choose?#
Choose a personal connection if the access should belong only to you, a team connection if one group shares the same boards, and a company connection if several areas need the same Miro access. The connection type decides whose access the agent uses.
| Type | Who it applies to | Good for |
|---|---|---|
| Personal | Only you | Your own boards and drafts |
| Team | Members of a team | A product or design team's shared boards |
| Company | The whole company | Shared workshop and planning boards used across areas |
Routines run with the permissions of the person who created them, so create scheduled routines with the access level you actually want the agent to have.
How do you choose which agents get Miro and which actions are allowed?#
In DoubleX Agentes, you decide per agent which systems it can use, and within each system which actions it can perform. Miro does not have to be available to every agent: enable it only for the ones that need boards.
A practical setup looks like this:
- A facilitation agent gets Miro with read and create actions, so it can prepare boards and summarize sessions.
- A reporting agent gets Miro in read-only mode, so it can pull information from boards but never change them.
- Agents in unrelated areas, such as finance, do not get Miro at all.
Actions that change data can be switched off, leaving the agent read-only. Before the agent sends, deletes or changes anything in your systems, it asks for confirmation and shows what it did step by step.
How do you test with a first request and check the history in Tasks?#
Test by asking a small, low-risk request on a board you own, then open the Tasks screen to see exactly what the agent did. Each request becomes a task with the full history: the request, every tool the agent used and the result.
Try one of these requests:
- "List the main themes from the sticky notes on my Q3 planning board."
- "Create a new board for our sprint retrospective with sections for what went well, what to improve and actions."
- "Turn this onboarding process into a flow diagram on a new Miro board: [paste steps]."
- "Read the product roadmap board and list the items that have no owner."
Then open Tasks and check who made the request, which Miro tools were called and when. If something is off, adjust the agent's instructions or the allowed actions and run it again. When you are happy, you can schedule the request as a routine, such as every Monday morning, using Triggers if you work through the API.
If you also keep files in Box, the process is the same: see How to Connect Box to an AI Agent.
Frequently asked questions#
Do I need to know how to code to connect Miro?#
No. You add the connector on the Connectors screen, sign in to Miro and describe what you need in your own words. The API, CLI and MCP server exist for those who want to go further, but they are optional.
Can the agent change my boards without asking?#
No. Before sending, deleting or changing something in your systems, the agent asks for confirmation and shows the steps. You can also turn off actions that change data so the agent only reads.
Does my Miro content train AI models?#
No. Your company's content is not used to train models, and requests go only to AI providers that do not use what they receive for training. You can also choose a zero-retention option on the Models screen.
Can I give Miro to only one agent?#
Yes. You choose which systems each agent can use, and which actions are allowed in each one, so Miro can be limited to a single agent.
Where can I see what the agent did in Miro?#
On the Tasks screen. Every request is saved with the request itself, each tool the agent used and the result, so you can check who asked, what was done and when.
Related guides
- How to Connect Box to an AI Agent: Step-by-Step GuideLearn how to connect Box to an AI agent: set up the connector, limit it to read-only, choose who can use it, and check the history of your first request.
- How to Connect Jam to an AI Agent: Step-by-Step GuideLearn how to connect Jam bug reports to an AI agent in DoubleX Agentes: set up the connector, pick who can use it, limit permissions, and run a first test.